HOME BCジャパン Espanol SHOP ABOUT FAQS Cam Regrind CONTACT
HONDA NISSAN TOYOTA SUBARU BMW MITSUBISHI DOMESTIC
B16A / B18C C30A / C32B SR20DET 2JZ NON VVT-i 2JZ VVT-i EJ205 M50 4G63 CHEVY LS
B18A / B18B K20 / K24 KA24DE 1JZ B58B30 EJ207 N54 4G63 EVO VIII DODGE SRT4
H22 / H22A D16Y8 VQ35 / VQ37 7MGTE 2AZFE EJ257 / EJ255 MINI B48 EVO IX DIESEL TRUCK
F20C / F22C MISC TB48 3SGTE 4AGE EJ257B DUAL B58B30M 4B11 EVO X JEEP
HYUNDAI RB26 / RB30 1GRFE / 2GRFE 4UGSE FA20 VW / AUDI 6G72 FORD
G6DA V6 VR38DETT 3URFE 1FZFE MAZDA R8/LAMBO V10 COYOTE
G4KF MISC MISC MZR 1.8T ECOBOOST
DURATEC

POLARIS HONDA YAMAHA CAN-AM KAWASAKI
XP 1000 PRO R TALON YXZ X3 KRX
XP TURBO

CAMSVALVE TRAINRODSPISTONSSTROKER KITSCRANKSMISC.
3SGTE CAMSHAFTS
There are four generations of the Toyota 3SGTE/3SGE, which were used in the Toyota Celica, MR2, Caldina and Altezza. All 3SGTE engines had a displacement of 2.0 L, with the 3SGTE being the performance factory turbo designation. The second generation, found in the MR2 turbo, was produced from 1990 to 1994, receiving a slight boost in horsepower and torque. It also proved to be a slightly more reliable engine. The second generation non turbo also did-away with the T-VIS system, which was replaced by the ACIS (Acoustic Control Induction System), proving to be much more efficient. T-VIS was, however, retained on the second-generation 3SGTE. The third generation 3SGTE was produced from 1994 to 1999 in the Celica and MR2. Power output was increased over the Gen 2, while torque figures stayed the same. It received a minor revision in 1996 for emissions (EGR) which reduced power output. These cams do not fit the BEAMS 3SGE 4th generation engine ("Black Top") which began production in 1997 and is equipped with VVT-i. BEAMS is an acronym which stands for Breakthrough Engine with Advanced Mechanism System.
Stage Description Part# Adv. Dur. Dur @ .050 Lift (in) Lift (mm) Kit# Cam Card Dyno Shop Status
Track/Strip Specification
Plug and play application. Short duration for nice track manners, slight lope at idle. Excellent all purpose spec. OEM spring OK.
BC0351 264°/264° 216°/216° .344"/.344" 8.74/8.74 BC0350-2
or
BC0350
In-Stock
Race Specification
Added duration for extended RPM's, also features more lift for bigger turbo setups. Requires an aftermarket spring kit like BC0350 or BC0350-2.
BC0352 272°/272° 222°/222° .400"/.400" 10.16/10.16 BC0350-2
or
BC0350
In-Stock
JDM 3GSTE MR2 Stock 256°/256° 204°/204° .335"/.335" 8.50/8.50
Bucket Diameter: 1.200"
Warning: BC0350 spring/retainer kit for use on shim under bucket only. BC0350-2 spring/retainer kit for use on shim over bucket and shimless bucket only.
619.749.9018 ph
619.749.9128 fx
Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved..
WARNING: This product can expose you to chemicals, including Chromium (hexavalent compounds), lead and lead compounds, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov